Författare Ämne: Sj Dg2 bygg with shapeways lokkorg  (läst 4148 gånger)

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #25 skrivet: ons 04 jul 2018, 22:13:53 »



Today I prepared the pantographs from entec.
Next step to adapt to the housing.

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #26 skrivet: fre 06 jul 2018, 18:32:06 »





alsum

  • Veteran
  • *****
  • Antal inlägg: 2.965
  • alsum
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #27 skrivet: fre 06 jul 2018, 18:53:35 »
Bra gjort Dg2 lok och fina modell. :up:

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #28 skrivet: fre 06 jul 2018, 19:13:08 »
Thank you very much!!

Unfortunately, there are only photos of Dg2 in the side view. I'll adjust the roof insulators again. When the other parts come in, windows, plows, isolators I will turn to the lighting. was there a red tail light ???
And finally, I will program a sound decoder and then there is a small video

pek54

  • Användare
  • ***
  • Antal inlägg: 75
  • Över mosse och genom skog på smalt 891-spår
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #29 skrivet: fre 06 jul 2018, 21:29:29 »
... // ...
Unfortunately, there are only photos of Dg2 in the side view. I'll adjust the roof insulators again. When the other parts come in, windows, plows, isolators I will turn to the lighting. was there a red tail light ???
... // ...
.
I was pretty damn sure that I had once seen a whole bunch of photos showing that interesting one-and-only "experimental" locomotive in many different views. Even one from above, if I remember correctly. But now I could only find very few of those pictures out there...  :???:

From the ones I did find, it's obvious that no tail light was initially fitted as part of the major rebuild, when the new frame with the fourth axle was introduced. But later photos from the sixties clearly reveal that both tail lights and horns were added at some point afterwards.

Here are direct links to all the photos I could currently find:

http://www.svenska-lok.se/Fotos/MotorSJ/SJ_Dg2_136_1976.jpg
http://i881.photobucket.com/albums/ac14/Karl-Axel_2010/FNA04-28.jpg
http://www.samlingsportalen.se/all/cgipict-img?Table=050&IMGID=Jvm_KBDB01442&Imgnr=1
http://www.samlingsportalen.se/all/cgipict-img?Table=050&IMGID=Jvm_KBDB01441&Imgnr=1
http://www.samlingsportalen.se/all/cgipict-img?Table=050&IMGID=Jvm_KBDB01440&Imgnr=1
http://www.samlingsportalen.se/all/cgipict-img?Table=050&IMGID=Jvm_KDAJ08560&Imgnr=1
http://www.samlingsportalen.se/cgipict-img?Table=050&IMGID=Jvm_KAFP00007&Imgnr=1
http://torbjornjansson.se/bilder/img492.jpg
http://i224.photobucket.com/albums/dd92/haage/Dg2136Mellerud1963.jpg

Not really sure if those photos will be of any help to you at all, but at least I hope so...  :beer:

/Pehr
Uppväxt före "Dagen H", då innerstadsresor i vår Kungliga Hufvudstad helst företogs i en A25.
Och förortsresorna fram till april 1964 oftast i en A29.
Med småländska rötter i släkten blev det också mycket YBo5p på somrarna.

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #30 skrivet: fre 06 jul 2018, 23:15:28 »
Thanks for the information.
the rear light is indicated on the housing, so it would be no problem to make it with led.
with the roof insulators, I think that I get this done. some things are not available as a finished part because I have to improvise.

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #31 skrivet: sön 08 jul 2018, 17:36:54 »
have programmed a bit with maerklin sounds today until the ordered parts come to continue building.


lgrfbs

  • Stammis
  • ****
  • Antal inlägg: 1.040
  • Gävleborg
    • Mitt CV
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #32 skrivet: sön 08 jul 2018, 17:49:58 »
Nice work!  :up:
Diod=lyser inte, Lysdiod=lyser.  Jemtrallarna, Shapeways , Kör: R2 HO - DCC & XpressNet (LocoNet) - Rocrail - DR5000 - LokReg

CalleA

  • Veteran
  • *****
  • Antal inlägg: 2.105
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #33 skrivet: tis 10 jul 2018, 16:37:26 »
Nice project!  :up:

The possibilities of combining 3D-printed bodies with ready-made chassis are becoming increasingly interesting for each day. I'm waiting for someone to design 3D-prints of small Swedish steam locomotives...  :approve:
Smalspår - moduler - H0+H0e - DCC - svenskt 1910-tal

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #34 skrivet: fre 13 jul 2018, 19:21:59 »


Today I have a few accessories parts mounted. The insulators I've made again now with 0.3mm wire. looks better.

lgrfbs

  • Stammis
  • ****
  • Antal inlägg: 1.040
  • Gävleborg
    • Mitt CV
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #35 skrivet: fre 13 jul 2018, 20:05:37 »
Then you are ready/done white this will you run it on some public show / module meeting?
 :up:
Diod=lyser inte, Lysdiod=lyser.  Jemtrallarna, Shapeways , Kör: R2 HO - DCC & XpressNet (LocoNet) - Rocrail - DR5000 - LokReg

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #36 skrivet: fre 13 jul 2018, 20:39:23 »
what do you mean by that?

lgrfbs

  • Stammis
  • ****
  • Antal inlägg: 1.040
  • Gävleborg
    • Mitt CV
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #37 skrivet: fre 13 jul 2018, 23:09:58 »
A; You have done a very nice job on this model.
B; I hope to see it live somewhere.
Diod=lyser inte, Lysdiod=lyser.  Jemtrallarna, Shapeways , Kör: R2 HO - DCC & XpressNet (LocoNet) - Rocrail - DR5000 - LokReg

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #38 skrivet: lör 14 jul 2018, 19:00:40 »
When I've finished building it, I'll let it drive on my Modulbahn. but this is still under construction. my dad started it years ago. modules are northern modules. a video will follow but until then I have something to do.

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #39 skrivet: sön 15 jul 2018, 17:45:56 »



yesterday and today I was busy with the windows. The pantographs got a different color and the buffers and kicks are also on it. Next I turn on the lights and then there are handrails and small parts of it.

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #40 skrivet: ons 18 jul 2018, 19:54:32 »


new video with lighting

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #41 skrivet: tor 19 jul 2018, 19:07:09 »
Today I will label the locomotive

To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #42 skrivet: tor 19 jul 2018, 19:08:18 »



To1973

  • Användare
  • ***
  • Antal inlägg: 65
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #43 skrivet: tor 19 jul 2018, 20:56:04 »



kattjaevel

  • Stammis
  • ****
  • Antal inlägg: 1.957
SV: Sj Dg2 bygg with shapeways lokkorg
« Svar #44 skrivet: fre 20 jul 2018, 07:39:07 »
Looks really nice
Torbjörn